Vision Systems VScom 200E PCIex Manual de usuario descargar pdf (Pagina 22)

4 Windows Driver

Figure 9: Windows 7 Installing Drivers

When this is completed, the hardware is recognized by Windows 7, and the drivers are loaded.

This may take some time, especially for many serial ports.

It is also possible to ﬁrst run the Installation program. This will install the drivers in the same way,

but they are not loaded. The system is prepared to detect a card. After shut down and installation

of the hardware the serial ports are installed without further user intervention. The same happens

when more cards are added to an existing system.

4.1.3 Verify the Installation

You can now verify the installation by looking at the “Multi-port serial adapters” section of the

Device Manager (Go there by Start - Settings - Control Panel - System - Hardware - Device

Manager). There you will ﬁnd the new device “VScom Industrial Card” listed.

Select this, and open the properties. In the “Advanced” tab, click the “Check” button to verify the

speed setting from the hardware installation. You may also rename the ports here.

About assigned port numbers In some systems the ports will receive numbers customers do not

expect. For example a card with two serial ports may receive the names ’Com5’ and ’Com8’, but

July 2011 VScom Industrial Card User Manual 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 52 53

Sin comentarios

Vision Systems VScom 200E PCIex Manual de usuario Pagina 22